2012 PREPARATION ITEM # 1

Sunforce 39303 390-Watt High-Efficiency Polycrystalline Solar Power Kit 10 pack

Product Features

· High-efficiency polycrystalline solar cells from Sharp provide advanced power output

· Weatherproof solar cells feature durable aluminum frames with tempered glass coverings

· Includes three 130-Watt polycrystalline solar panels, a 30-Amp digital charge controller, a voltage tester, and mounting accessories

· 25-year solar panel warranty

· Kit is easy to install and virtually maintenance-free

Product Description

Product Description
The Sunforce 39303 390-Watt High-Efficiency Polycrystalline Solar Power Kit will give you several more reasons to love the sun. It provides the power you need, while helping you save money and protect the environment. This kit is ideal for cabins, recreational vehicles, remote power, back-up power, and 12-volt battery charging. It comes with everything you need to start producing up to 390 Watts of clean, free power in all weather conditions.

Convenient Power That Helps You Save Money and Protect the Environment
The Sunforce 39303 390-Watt High-Efficiency Polycrystalline Solar Power Kit lets you harness the power of the sun, the most powerful and plentiful source of energy available to us. This inexhaustible supply of power is freely available wherever the sun shines, and gives users the freedom to power their homes, RVs, boats, batteries, and electronic equipment far from civilization or right in town. Solar power can help cut your energy bills by reducing your dependence on the main electrical grid, and can also provide back-up power during outages. Unlike nuclear and fossil fuels, solar power systems are clean and pollution-free, and they require very little maintenance to operate.

Everything You Need to Power Up
The Sunforce 39303 390-Watt High-Efficiency Polycrystalline Solar Power Kit has everything you need to start generating power. It includes three (3) Sharp 130-Watt polycrystalline solar panels with durable rustproof aluminum frames, a 30-Amp Digital Solar Charge Controller, a voltage tester, and mounting brackets with accessories for easy installation. Note: Wiring is not included with this kit.

With the included 30-Amp Digital Solar Charge Controller installed, there is no danger of reverse current sapping your battery strength at night. This charge controller can also handle up to 500-Watts of solar power, making it ideal for future expansion and use with additional solar panels.

About Polycrystalline Solar Power
Polycrystalline silicon is a material consisting of thin wafers that are cut from a silicon crystal which has grown in several directions. This advanced surface texturing process provides polycrystalline solar panels with a higher power output than amorphous panels of the same dimensions, and makes them more cost and space-effective. These individual wafers are assembled into panels that are covered by durable, weatherproof tempered glass. Thanks to their efficiency and durability, these solar panels require virtually no maintenance once installed. This kit includes three Sharp polycrystalline solar panels that have a maximum power output of 130-Watts/7.6-Amps each.

Solar panels convert sunlight into an electric current; they do not actually store power. Sunforce Solar Power Kits are primarily used to recharge all types of 12-Volt batteries, including lead-acid automotive batteries, deep-cycle (traction type) batteries, gel-cell batteries, and heavy-duty (stationary type) batteries. When using these solar panels to run appliances on a regular basis, the use of deep-cycle marine batteries is recommended. This type of battery is designed to withstand the frequent charge and discharge cycles associated with solar panel use. This kit does not include a 12-Volt battery.

The included 30-Amp Digital Charge Controller must be installed to prevent any connected batteries from overcharging. It can handle up to 500-Watts of total power from any number of solar panels connected in parallel. The charge controller will also keep any connected batteries from discharging at night.


Product Description
The Sunforce solar kit is comprised of 3 units of the 130 watt polycrystalline sharp solar panel. These panels are designed for RV's, homes, boats, back-up and remote power use, 12 Volt battery charging and solar power stations, and much more. These are three high efficiency polycrystalline solar cell modules, which are completely maintenance free and easy to install. Use this pack for various tasks, or connect the multiple panels for more power. The panels are completely weatherproof, and have a 25 year warranty. This complete kit includes (3) 130 watt sharp panels, 3 mounting brackets, 1 voltage tester, and a 30 amp digital chare controller with a max output of each panel individually 130 Watts, 7.5 amps.

Sunforce 39303 390-Watt High-E

2012 PREPARATION ITEMS #2

Sunforce 44444 12-Volt 400-Watt Wind Generator

Product Features

· Uses wind to generate power and run your appliances and electronics

· Constructed from lightweight, weatherproof cast aluminum

· Fully integrated regulator that automatically shuts down when the batteries are completely charged

· Maximum power up to 400 watts or 27 Amps

· Measures 15 x 9 x 27 inches (WxHxD)

Product Description

Amazon.com Product Description
The Sunforce 44444 12-Volt 400-Watt Wind Generator harnesses the power of the wind to provide you with clean, free renewable energy. Not only can it lower your electric bill at home, but it's also a great choice for generating electricity at cabins and worksites far from existing power lines. With compatible equipment, Sunforce wind generators can even be paired with solar panels for additional, diversified power creation.

Convenient Power That Helps You Save Money and Protect the Environment
On land and at sea, people have been harnessing the power of the wind for thousands of years. With the Sunforce 44444 12-Volt 400-Watt Wind Generator, you can use the power of the wind to provide energy for your home, cabin, worksite or remote equipment. Wind power can help cut your energy bills by reducing your dependence on the main electrical grid at home, and is also ideal for many remote locations that are far from existing power lines. Unlike nuclear and fossil fuels, wind power systems are clean and pollution-free, and they require little maintenance to operate.

Flexible Power for New or Existing Systems
The Sunforce 44444 12-Volt 400-Watt Wind Generator is an ideal addition to many new and existing renewable power systems. It provides up to 400 Watts or 27 Amps of power at maximum efficiency. The fully integrated regulator automatically shuts the unit down when the batteries are charged to minimize wear.

The Sunforce 44444 12-Volt 400-Watt Wind Generator features a durable aluminum body and lightweight carbon fiber blades that are optimized for maximum efficiency and low noise. It is completely weatherproof, and the patented high-wind over-speed technology keeps the unit safe in high wind and stormy conditions. Assembly is required, but this generator installs easily and mounts to any sturdy pole, building, or the Sunforce 44455 Wind Generator 30-Foot Tower Kit.

About Wind Power
The Sunforce 44444 12-Volt 400-Watt Wind Generator can provide an average monthly output of 38 kilowatt hours with an average 12 mile-per-hour wind speed. It requires an 8 mile-per-hour wind speed to start generating power. As the local wind speed increases, so does the power output. Since this type of generator uses wind as "fuel", it is important to choose an appropriate site. The ideal location for a wind generator is 20 feet above any surrounding object within a 250-foot radius. Wind speed increases with height above ground, so a taller mast can provide significant gains in energy production.

Wind generators convert the mechanical energy of their spinning blades into an electric current; they do not actually store power. Sunforce Wind Generators are primarily used to recharge all types of 12-Volt batteries, including lead-acid automotive batteries, deep-cycle (traction type) batteries, gel-cell batteries, and heavy-duty (stationary type) batteries. When using this wind generator to run appliances on a regular basis, the use of deep-cycle marine batteries is recommended. This type of battery is designed to withstand the frequent charge and discharge cycles associated with wind power use. Attempting to run the wind generator on an open circuit without a battery may cause damage to the generator or connected equipment.


Product Description
The Sunforce 44444 400 Watt Wind Generator uses wind to generate power and run your appliances and electronics. Constructed from lightweight, weatherproof cast aluminum, this generator is also a great choice for powering pumps or charging batteries for large power demands. With a maximum power up to 400 watts or 27 amps, this device features a fully integrated regulator that automatically shuts down when the batteries are completely charged. The 44444 is virtually maintenance free with only two moving parts, and the carbon fiber composite blades ensure low wind noise while the patented high wind over speed technology guarantees a smooth, clean charge. Assembly is required, but this generator installs easily and mounts to any sturdy pole, building, or the Sunforce 44455 Wind Generator 30-Foot Tower Kit. The 44444 uses a 12-volt battery (not included) and measures 15 x 9 x 27 inches (WxHxD).

WIND GENERATORS

2012 PREPARATION ITEM #3

Revolution Smart Cell Hydrogen Generator -Complete Kit- Custom Plug-n-Play System

Convert water into Fuel For vehicles, heating, cooking etc....

Product Features

· A Multi-Cell Hydrogen Generator That Is Packed With Efficiency, Reliability And Stability.- We Gaurantee it.

· This is a commercial grade plug-n-play system~All Hardware Is Built With Marine Quality 316L Stainless Steel

· Comes With 2 Enhancers 1 For your MAP or MAF Sensor & 1 For Your o2 Sensors. Kit Also Available Without Enhancers!

· LED Light Lets You Know When Your Water Level Is Low

· 541-756-7050 Video Available! Shop & Compare Understand The Value

Product Description

Product Description
What Makes The Revolution Series Different From Others? AMP DRAW TEMPERATURE -HHO PRODUCTION ~When shopping for a hydrogen generator make sure they talk about all 3 of these factors. If they don't - be leery. ~ AMP DRAW - How Many amps does the hydrogen generator draw? This is what a hydrogen generator pulls from your vehicles battery. Your alternator supplies current to the battery and other electrical devices. To much current or amp draw taxes the alternator and will make the engine work harder, which in turn burns more gas. Many systems on the market, draw to many amps and end up requiring a PWM (pulse with modulator) to govern or throttle the amp draw. Some units, especially single cells are like runaway freight trains, climbing in amps the longer they run. Our Revolution Hydrogen Generators are highly proficient and pull low amps, even after hours of running. With the stability of the Revolution you will never need a PWM. TEMPERATURE - The temperature range of the generator is very important. Because so many systems on the market draw such high amps, there adds to the problem of heat. In order to see significant gains in gas mileage, many HHO generators may start out with low amps, but as the amps climb they start generating unnecessary heat. A hydrogen generator running at high temperatures produces steam which is harmful to the engine. The Revolution produces low levels of heat and can run 24 hours a day at around 85 degrees, making it highly efficient. HHO PRODUCTION - 2 - 3 1/2 LPM Another great thing about Revolution - It Doesn't Freeze! Complete Installation Guide With Colorful Diagrams And Access To Video For The MAP / MAF Sensor Enhancer Along With Our Phone Support Makes Installation Painless. 541-756-7050 Housing is made from thick quality 3/8" acrylic, proficiently built & hydrogen tight.

HYDROGEN GENERATORS

2012 PREPARATION ITEM #4

AeroFlo 60 Systems

HYDROPONICS INDOOR GARDENS (NO DIRT ALL WATER)

Our largest AeroFlo2 unit, the AeroFlo2 60, accommodates sixty plant sites. Growers who wish to expand this system can enjoy 120 plant sites with the addition of our AeroFlo2 60 Extension Unit. Users can choose to configure the grow chambers all on the same side or to stagger them to cover a larger area or to grow larger plants. The AeroFlo2 60 features a generous 40-gallon Panda reservoir.

The AeroFlo2 60 is sized 5' 1" x 6' 10"

The AeroFlo 60 system includes:

· 40 gallon Panda reservoir

· Six 6ft. grow chambers

· TNC pump

· Injection manifold

· Support structure

· 3" Grow Cups

· Coco cups and Grorox

· 3 part Florakit nutrient

HYDRO PONICS GARDENING SYSTEM

2012 PREPARATION ITEM #5

WATER EXTRACTORS

· Material: Heavy-duty Rotational Molded Polethylene

· Type: Under Ground

· Size: 574 Gallons

· Length: 88"

· Width: 48"

· Height: 48"

· Mesh Screen: Leaf Catcher

· Color: White

· Power Source: 124 Volt Outlet

· Weight: 300 lbs

· Items Included: Submersible Pump | Leaf Catcher

· Child Protection Feature: Child Safe Lid

Did you know that in a typical one inch rain event landing on 1000 square feet of roof produces around 600 gallons of water? Lawn and garden watering make up nearly 40% of total household water use during the summer. If you live in an area that has trouble maintaining enough water for your plants and outdoor watering needs to last through the dry season, you will want to add the Rain Water Harvest Underground Tank 574 Gallon system to your landscaping theme.

Rainwater harvesting using rooftops and underground tanks is a traditional approach established over hundreds of years. Rainfall falling on rooftops is collected and channeled into underground tanks that can store and provide enough safe drinking water or outside use water to meet daily needs for months. In contrast to surface tanks, underground tanks are not visible, are not affected by freezing weather, and can last indefinitely. Underground tanks provide a cool, dark environment inhospitable to algae and microbial growth and they are always preferred when rainwater is to be reused inside buildings. These large capacity systems are very easy to maintain and their durable construction will ensure that they will provide years of dependable service.

The tanks are manufactured using a commercial grade polyethylene with UV8 inhibitors that prevents mold and algae growth, which will keep your stored water fresh and beneficial until you need it. These special features also ensures that the storage tanks will not fade or deteriorate over a period of 5 years, allowing you years of service, virtually hassle-free. The rotational molding feature of this barrel produces virtually stress free construction of large or unusually shaped barrels. The walls are uniform thickness, giving dependable and reliable service for many years. With this rain harvest system, you divert water from your down spout with a special hose that has a leaf catcher included, keeping debris out of your tank. Then that water is stored in the 574 gallon tank for use whenever you need it. When you need to access the water, a submersible pump inside the tank delivers all the water you need to the specially placed outlet. We have added a child safe lid to keep your small children safe and out of harm's way.

This round rain harvesting solution provides an attractive, efficient, economical, and unique way to capture and store rainwater. Your plants will benefit from naturally produced rainwater because rainwater is slightly acidic which helps plants access soil nutrients better. Improve the look of your landscaping around your home and in your garden while giving the local water source a break. This specially designed rainwater harvest system will give you water to keep your plants healthy, provide emergency drinking water, keep your garden lush and green, your pool full, and you can even wash your vehicles with this naturally soft free water.

RAIN WATER BARREL SYSTEM